Thursday, December 1

– Nikon capture nx2 ultima version free

Looking for:

クラブ活動 | 金光八尾中学校高等学校.Nikon Capture NX 2 Free Download – Pc File Worldz

Click here to Download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Manual Viewer 2 Download software for Nikon products. To view descriptions, cautions, and download and installation instructions, click “View download page”. Designed to closely match the way photographers work with their images, Capture NX 2 is easy to learn and creates the highest quality results. Features.
 
 

 

クラブ活動 | 金光八尾中学校高等学校.Nikon Japan abandons ViewNX 2, ViewNX-i, Capture NX2 and Capture NX-D completely – DIY Photography

 

The electrical and elecronic interfaces are exactly the same, which is why the adapters are quite simple to make. An adapter would basically be a SD card reader, and would need elecronics inside.

Note however that an adapter converting CFexpress type-A to type-B and type-C would be also easy to make. Also some cameras use the vpg mode for which a micro sd would be way too slow even the fastest UHS-II card would be too slow. Some CFexpress haven’t implemented it fully resulting in a non working condition after a R5 fw update which enabled vpg These cards needed a firmware update as well. I’m sure they’re coming. Probably there will be one that works with Micro-SD Express cards, when those finally become available.

There just aren’t enough cameras out there that use CF Express cards right now. In a year or two we’ll probably see such an adapter. I’m not too keen on trying this Frankenstein out on a Z9 that I’ve yet to receive.

The cost of CFast cards is one of the reasons I shoot video externally on the Atomos recorder instead. Funnily enough for you in US is much cheaper than here in Italy. If you do price conversion do it right. US prices don’t include vat. Living in the US. There is sales tax here that is not included in the price indeed, but it is much less than the typical VAT in Europe.

I pay 10 percent sales tax on everything I buy except basic food and not restaurant food, just from the grocery store. Those two total over half my monthly income on a good month, and don’t take into account all the other taxes. Washington state’s property tax based system is super regressive, punishing us workers while the wealthy pay no significant taxes. No significant taxes?

That guy paid more taxes than ten regular people, yet you say people like that are paying to significant taxes. Well buddy, people like him pay for your kids’ education. They also pay to maintain the sewer system, the roads, and for the prisons and police stations, without which your neighborhood would be a war zone. Their neighborhood would have its own, private security force, and high walls to keep the criminals out, but regular people can’t afford extreme measures to keep their neighborhood safe like tall gates and a guard house with armed guards.

Thank God for the wealthy, who pay many thousands of dollars every year in property taxes each year, because it props up society. We’d be a lot worse off without people like Jeff Bezos and Elon Musk. Those billions are safely stored in the Caymans. One of my bike shop clients is among the attorneys who manages that fund.

And of course, the CEOs who make times what those who generate their capital for them earn, are also keeping their money in the Caymans. So your friend pays fifty grand in taxes. That implies he’s got the millions needed to buy a property expensive enough to be taxed that highly.

And before you say it: YES, I would love to be rich enough to face this issue. I feel like I could live pretty well on the first ten million.. I don’t think that myself or anyone needs a hundred billion dollars all to themselves, tax free. And finally.. He comes out here, buys a couple plots of land and combines them. Then builds a huge, ostentatious McMansion on the property. My property taxes go up several hundred dollars every month, and he doesn’t shop at my bike shop, either.

My town’s bylaws are specifically set up to prevent this, but his money greases palms and he gets the zoning variance that us townies could never afford. I’d like to know if anyone has ever tested the relatively new Manfrotto CF express B cards.

They are said to be even faster than Prograde as concerns writing data. Shooting bit lossless compressed RAW. NEF , I get typically frames with this card in a single 7FPS continuous burst before the buffer fills and the frame rate drops. Switching to bit lossless compressed file format, I get around 42 frames before the frame rate drops. By comparison, with a GB Sony Tough CF-e card I get basically infinite frames at bit lossless compressed, and about 63 frames at bit lossless compressed.

My results are based on a GB card purchased in August Micron has announced one in January, but its price is still unknown. Richard Butler The scenario above is lovely, no betraying. I mean the original Type-B cards could be made for less money. It would be more useful to have a Express to fast SD adaptor, to have two SD cards for a R5 Those memory cards are designed for laptops which have heatsinks for cards and fans for cooling.

It would cost millions to design a translator ASIC and you’d never turn a profit on it. Because they are basically SSDs. Does such a thing even exist that’s not a CFE B card? It’s also a matter of supply and demand, those SSDs are being made and sold in larger quantities, fast removable media probably has a far smaller market.

Most people aren’t worried about GB cards. There are cameras out there that fill a 1TB card with video in less than an hour. Media costs starts making the camera seem the cheap bit. I am in the tech field and have built a lot of external drives using varies different type of NVME M. Interesting what you call a computer. Apple is quite common in the states, but in the states only If you watch for sales. The only potential downside to this is that some NVMe drives I’ve seen can run hot especially during continuous writing or reading , so this can potentially pose a problem for the camera and could possibly trigger a thermal shutdown of the camera although probably not that likely.

In theory this is a good idea, and it may work for some NVMe drives, but for others, it may not work as well due to heat issues, even if you use the thermal paste which more or less will just help transfer the heat to the casing. But for me, I’d rather pay more for a pre-made card from Sandisk for example , and have a warranty where I can just send it back without having two pieces from two different mfrs to deal with.

Some controllers do get hot, and would be fine in a computer because there’s more airflow, but in a camera, not so much. In theory, this device seems appealing, but the potentials for problems especially with some “performance” NVMe drives, which tend to run faster obviously, but at potentially higher temperatures again, fine for computer use or even laptop use where there is a fan or other cooling solution to help move the heat around, but not so much in a camera, which is the bigger concern here.

In stead of saying “what if it doesn’t work” why don’t you try “what if it works? So many half empty glasses here. It’s usually the controller that gets the hottest rather than the NAND so it’s also very localized. Most of them are also not sandwiched too badly against other components tho, I can see thermals being compounded inside a camera where the card slot is completely sealed in and it’s often located near the battery which will be another source of heat.

Could be a non-issue for more laid back stills shooting and a whole other story for bursts or video. You don’t really need something like this for laid back shooting tho, so those most interested in it are also those most likely to run into issues. They do, but they also have a fan in most cases, or are some how attached to the outer casing through thermal pads to help dissipate heat.

My other concern with such a card case is if it got distorted from heat. Not looking forward to the day when on top of all the other idiosyncrasies we actually have to worry about CF-E thermals, heh, guess there’s something to be said for those QVLs. I am usually a “whatever works” kind of person, but there’s no way I’m trying a homemade memory card in my Z9 – given the amount of heat that is produced by cameras filming 8K.

I think I’m even going to stick with the obscenely expensive Nikon batteries for this camera again, because of the internal temp.

I think I was shooting 15 fps. The Anker is on the Nikon approved list. Costs half a 18 D including the USB charger. Has more than twice the power.

It shows how a rip-off these CFexpress cards actually are. This could be a good alternative. Will wait for the first feedbacks but am tempted to try rather sooner than later. May be so – but would you risk your camera warranty or insurance for a few dollars using home made card, not mentioning the possibility of losing all your photos if something go wrong – at least commercially available cards carry a warranty and possibly approval from your camera maker.

Mais51 – I think it is near impossible to see how such a failure would be caused. Nonetheless this is interesting and if it works I am not afraid to experiment. Nobody is forcing you to do so too. Some CFex cards run very hot – up to 90oC – not too sure whether the custom case could handle such elevate temperature or melt down in the memory slot. Perhaps, but the “rip off” high priced cards generally have better QA in the materials. So, you can select your NVMe here, but who makes the circuit board and controller that you plug it into?

The controller will make a huge difference here as the NVMe will only run as fast as the controller lets it. But at least with the pre-made cards from Sandisk and others you know the rated speed. Here it’s anyone’s guess because just because the NVME claims to run at one speed, doesn’t necessarily mean you will get that speed the controller can bottleneck it.

They would have to find a way to prove that you used an “unsupported” card which may have lead to overheating, which is a long stretch on the camera mfr’s part. DIY version will not “melt” in memory card slot it is made of metal! I’ve used them in Nikons and Canons, and they work very well. Were they legit Ritz branded cards? I see a lot of discussions about people getting fake cards even fake Sandisk cards on Amazon Sony has just released a trio of impressively small, light, ultrawide lenses for APS-C.

These lenses are designed for vloggers, so Chris decided to film himself and find out how they perform. Holy moly, this thing is tiny! We take the adorable Sigma mm F2. Here’s what’s new and what we think so far We’ve been able to spend some quality time with Fujifilm’s APS-C flagship, and we have plenty of opinions! How do you make weird lens even weirder? Put a periscope on it!

We check out the new Laowa Periprobe 24mm F14 2X and explore some of the creative things you can do with such a bizarre lens. What’s the best camera for shooting landscapes? High resolution, weather-sealed bodies and wide dynamic range are all important. In this buying guide we’ve rounded-up several great cameras for shooting landscapes, and recommended the best.

If you’re looking for the perfect drone for yourself, or to gift someone special, we’ve gone through all of the options and selected our favorites.

These capable cameras should be solid and well-built, have both speed and focus for capturing fast action and offer professional-level image quality. Although a lot of people only upload images to Instagram from their smartphones, the app is much more than just a mobile photography platform. In this guide we’ve chosen a selection of cameras that make it easy to shoot compelling lifestyle images, ideal for sharing on social media.

The lens is fully manual and offers a 16mm full-frame equivalent focal length. It features a physical aperture dial, a minimum focusing distance of 25cm 9. This makes DJI the fifth entity to join the L-mount alliance, joining Leica, Leitz Cine, Panasonic and Sigma as partners in the mission to create ‘one unified lens mount standard. Do you want to shape and create content for the largest audience of photography and video enthusiasts in the world?

Go behind the scenes to see what it takes to shoot some of the most valuable race cars in the world. Although Adobe says it will eventually make the web-based version of Photoshop free for all to use, the beta testing is currently limited to Canada we’re quite sure Chris and Jordan had nothing to do with this, but you never know. Adobe has released a major update to its Lightroom ecosystem that includes video editing capabilities, new preset functionality and much more.

Capture One 22 But what’s do these modes achieve? We to look at how data is captured, how it’s stored and what benefits you should expect from bit capture.

In addition to the new stills and video capture modes for the a1, Sony has also released a minor firmware update for its a7S III full-frame mirrorless camera. Have you ever come across a ‘Pro Mist’ or ‘Cinebloom’ filter and wondered what they do, or why you might want them?

This little guide will help you get started on your mist filter journey. For the first time, and aided by the Hubble Space Telescope, researchers have measured the mass of an isolated black hole through the Milky Way Galaxy. While none of these are deal-breaking issues, here are some the annoying camera quirks that really get under Chris and Jordan’s skin. This could be one of Leica’s most expensive limited-edition kits if they do end up retailing for the prices they’re expected to fetch.

Who wouldn’t want a camera that looks like R2-D2 from Star Wars? James DeFehr developed Pyro , a film developer that promises extremely fine grain, high contrast, expanded tonal control and long shelf life. It looks like a promising developer for black and white film enthusiasts. Leica loves a good special edition camera and lens. The annual Comedy Pet Awards photo competition has released a collection of the best images submitted so far, showing off the funny side of all kinds of animals. We go hands-on with the new XF mm F5.

To make streaming and controlling your video streams easier and more accessible, Atomos has released the Zato Connect streaming monitor. You can control video feeds, add effects, and even record backup footage for ‘as-live’ streaming with the device. Technology component experts Techinsights has posted a detailed analysis to its website confirming Nikon is using a Sony Semiconductor image sensor inside its flagship Z9 mirrorless camera. Firmware v2. Dubblefilm has announced a new ISO color film.

The Cinema film promises distinct colors and tones and a halo effect around bright red lights. Panasonic says the L2 tech tie-up with Leica will not affect the L-mount alliance the two companies share with Sigma. Take a closer look at what the 11mm F1. Submit a News Tip! Reading mode: Light Dark. Login Register. Best cameras and lenses.

Click to enlarge. Via: PetaPixel. Tags: cfexpress-type-b , memory-cards , storage. View Comments Comments All RobC88 Hi all.

TimP I would guess the card isnt recognized because it has no partitions. Tested sustained read of 1. TimP A lot of fluff in these comments, normal cfexpress cards generate a huge amount of heat anyway, an SSD in a case is not going to be any worse.

Alberto Kioxia gb works pefectly on R5, R3 and D Richard Poinvil I also shot frames as fast as I could on both cards. And sorry that this isn’t very scientific. Richard Poinvil Got mine all set up. Mike Don’t forget that thermal paste – eeeeeeeeesential! Scottelly An interesting follow-up article would be to take apart a few CF-Express cards to see what’s inside them. TimP funnily enough most of the time is toshiba chips ;. Scottelly Yeah, it’s amazing, isn’t it?

Scottelly And if they don’t fit right? RMK Colorado The space inside very tight and thermal pads wouldn’t fit. Just use CPU thermal paste. TimP really not enough space, didnt have any 0. Salgado Photo How do you know?

Frankinidaho Geez, what could go wrong? Frankinidaho arniebook And it was even Y2K compliant. Francis Sawyer People always predict “prices will fall” on every new rip-off flash-storage standard, but they’re wrong. Scottelly Me too. It’s the correct form factor. Scottelly In the article it gives a link to the manufacturer’s on-line store, where in includes some information about compatibility. Nikonmaniac Does it work? Scottelly Awesome! Kharan Nice! JT26 Awesome content guys thanks very much!

PredatorsPrey You probably could. JT26 Thanks for the reply. PredatorsPrey You’re welcome. MonoCA Er, high quality expensive NVMe units can have a thermal diode that, with the software that comes with, can report the temperature.

Razor The enclosure may be designed with with a thinner materials to cheap out on BOM cost while charging a lot for what is an aluminum case and a passive pin adapter. Scottelly They probably designed the enclosure to accept SSDs of various thickness. Chaitanya S Wendel of Level1Techs has done a review of even jankier solution which allowed nvme ssd to be used as CFexpress do check it out on youtube. Go figure. Relaxed Seriously. PredatorsPrey Also some cameras use the vpg mode for which a micro sd would be way too slow even the fastest UHS-II card would be too slow.

Scottelly I’m sure they’re coming. Prophecies The cost of CFast cards is one of the reasons I shoot video externally on the Atomos recorder instead. US prices don’t include vat So they cost about the same. Richard Butler xtam – Sure, but at the point you risk opening up the discussion to an ever broadening discussion of levels of government support, healthcare and cost-of-living, which has nothing at all to do with cameras or photography.

Mr Bolton I pay 10 percent sales tax on everything I buy except basic food and not restaurant food, just from the grocery store. However, we can’t have such nice things here in the States, because “Freedom. Scottelly No significant taxes? Scottelly Thank God for the wealthy, who pay many thousands of dollars every year in property taxes each year, because it props up society.

He’s not paying enough in taxes. Mr Bolton I feel like I could live pretty well on the first ten million.. Mr Bolton And finally.. So why exactly, should I be thanking anyone for that? Snoddas Probably a rebranded Delkin card.

UltraviewZ1 Not sure you safe. That’ll be interesting. That’s what It’s for. UltraviewZ1 Yes prices are tumbling. Richard Butler Who is betraying what promise in this scenario? Mike Engles It would be more useful to have a Express to fast SD adaptor, to have two SD cards for a R5 Those memory cards are designed for laptops which have heatsinks for cards and fans for cooling. FuhTeng No, that still doesn’t suffice panther fan.

Of course you’re going to pay more for specialized equipment. And that is above MSRP. Impulses It’s also a matter of supply and demand, those SSDs are being made and sold in larger quantities, fast removable media probably has a far smaller market.

NickZ Most people aren’t worried about GB cards. Michael Berg Impulses maybe because it’s overpriced? Jeff Greenberg duplicate. Jeff Greenberg many pros risking DIY affordability acquire a “future part-time pro” bias This electronics mashup really is not something I’m going to trust. Melander You need to write alot of data to make them overheat.

You probably could. It might also fully depend on the SSD. Some are getting hotter which should benefit from the better heat transfer of thermal paste while those ssds not getting that hot in use might be fine. The big question is what the right thickness for the pad would be. Thanks for the reply. I have a load of pads of different thickness so should be good. I like an electronics DIY project You’re welcome. Just figure out how hot the ssd you’re going to use gets before trying it out and maybe consider a different one not getting that hot.

It’s unfortunately hard to find reviews including temperature measurement during use. You better don’t want the ssd to do an emergency shut down if it gets too hot resulting in a card failure message on the camera display.

If you consider it also have a look at the adapters surface if it is polished as smooth as a cpu block or more rough. If the latter is the case you shouldn’t consider thermal pads anymore. Er, high quality expensive NVMe units can have a thermal diode that, with the software that comes with, can report the temperature. It occured to me that the host card has to have electronics to take a four bit wide data stream from the NVMe and convert to a two bit wide form for the camera interface.

That, I guess, could cut the speed in half unless the camera side is specially fast. Or perhaps the reason for the high CF prices low volume? Wow, that instructional photo of thermal paste seems a bit much. Reminds me of The Verge’s infamous video on PC assembling. The enclosure may be designed with with a thinner materials to cheap out on BOM cost while charging a lot for what is an aluminum case and a passive pin adapter. Since that SSD size is much thinner than a CFexpress card, they are probably making it up with tons of thermal paste rather than a thicker aluminum plate.

They probably designed the enclosure to accept SSDs of various thickness. Extra thermal paste is needed, because there is a lot of space between the SSD and the enclosure. Some SSD models probably don’t require as much thermal paste as others. Just remember to remove any labels or stickers before applying the thermal paste. I am willing to give this a try so long as it is guaranteed not to damage my camera, which I will need to look into peer reviews for.

I think the risk is related to damaging the ssd and loosing warranty. I don’t see any reason for any damage in the camera. Wendel of Level1Techs has done a review of even jankier solution which allowed nvme ssd to be used as CFexpress do check it out on youtube. These things do work just fine. People usually don’t have just one memory card. For working pros including myself , the price of CFexpress cards can really hurt my wallet.

Nobody pays a premium because they want to. If I can save money here and there, why not? You missed the point on saving money wherever I can.

If there’s no risk of camera damage, why would you willingly pay extra for a similar item? And no, none of my memory cards are more important than my R3 or the expensive lenses. Perhaps the photos in the cards right after an assignment, but cards are more easily replaced than gear. I love people commenting who clearly don’t even understand the basics.

If you shoot to two card for security or keep one copy for you and the other for the client, you might need two more. Even when you’re reimbursed by the client, it’s still a lot of money. Now change the format on a photographer. I don’t care who you are, that’s a chunk of change. But then, what do i know, I’m no engineer. Is the ROI not justifiable given the development costs, or is this just an issue with patent, i have no clue. The electrical and elecronic interfaces are exactly the same, which is why the adapters are quite simple to make.

An adapter would basically be a SD card reader, and would need elecronics inside. Note however that an adapter converting CFexpress type-A to type-B and type-C would be also easy to make.

Also some cameras use the vpg mode for which a micro sd would be way too slow even the fastest UHS-II card would be too slow. Some CFexpress haven’t implemented it fully resulting in a non working condition after a R5 fw update which enabled vpg These cards needed a firmware update as well.

I’m sure they’re coming. Probably there will be one that works with Micro-SD Express cards, when those finally become available. There just aren’t enough cameras out there that use CF Express cards right now. In a year or two we’ll probably see such an adapter. I’m not too keen on trying this Frankenstein out on a Z9 that I’ve yet to receive.

The cost of CFast cards is one of the reasons I shoot video externally on the Atomos recorder instead. Funnily enough for you in US is much cheaper than here in Italy. If you do price conversion do it right. US prices don’t include vat. Living in the US. There is sales tax here that is not included in the price indeed, but it is much less than the typical VAT in Europe. I pay 10 percent sales tax on everything I buy except basic food and not restaurant food, just from the grocery store.

Those two total over half my monthly income on a good month, and don’t take into account all the other taxes. Washington state’s property tax based system is super regressive, punishing us workers while the wealthy pay no significant taxes.

No significant taxes? That guy paid more taxes than ten regular people, yet you say people like that are paying to significant taxes. Well buddy, people like him pay for your kids’ education. They also pay to maintain the sewer system, the roads, and for the prisons and police stations, without which your neighborhood would be a war zone.

Their neighborhood would have its own, private security force, and high walls to keep the criminals out, but regular people can’t afford extreme measures to keep their neighborhood safe like tall gates and a guard house with armed guards. Thank God for the wealthy, who pay many thousands of dollars every year in property taxes each year, because it props up society. We’d be a lot worse off without people like Jeff Bezos and Elon Musk.

Those billions are safely stored in the Caymans. One of my bike shop clients is among the attorneys who manages that fund. And of course, the CEOs who make times what those who generate their capital for them earn, are also keeping their money in the Caymans.

So your friend pays fifty grand in taxes. That implies he’s got the millions needed to buy a property expensive enough to be taxed that highly. And before you say it: YES, I would love to be rich enough to face this issue. I feel like I could live pretty well on the first ten million.. I don’t think that myself or anyone needs a hundred billion dollars all to themselves, tax free.

And finally.. He comes out here, buys a couple plots of land and combines them. Then builds a huge, ostentatious McMansion on the property. My property taxes go up several hundred dollars every month, and he doesn’t shop at my bike shop, either. My town’s bylaws are specifically set up to prevent this, but his money greases palms and he gets the zoning variance that us townies could never afford. I’d like to know if anyone has ever tested the relatively new Manfrotto CF express B cards.

They are said to be even faster than Prograde as concerns writing data. Shooting bit lossless compressed RAW. NEF , I get typically frames with this card in a single 7FPS continuous burst before the buffer fills and the frame rate drops. Switching to bit lossless compressed file format, I get around 42 frames before the frame rate drops. By comparison, with a GB Sony Tough CF-e card I get basically infinite frames at bit lossless compressed, and about 63 frames at bit lossless compressed.

My results are based on a GB card purchased in August Micron has announced one in January, but its price is still unknown. Richard Butler The scenario above is lovely, no betraying. I mean the original Type-B cards could be made for less money. It would be more useful to have a Express to fast SD adaptor, to have two SD cards for a R5 Those memory cards are designed for laptops which have heatsinks for cards and fans for cooling. It would cost millions to design a translator ASIC and you’d never turn a profit on it.

Because they are basically SSDs. Does such a thing even exist that’s not a CFE B card? It’s also a matter of supply and demand, those SSDs are being made and sold in larger quantities, fast removable media probably has a far smaller market. Most people aren’t worried about GB cards. There are cameras out there that fill a 1TB card with video in less than an hour. Media costs starts making the camera seem the cheap bit.

I am in the tech field and have built a lot of external drives using varies different type of NVME M. Interesting what you call a computer. Apple is quite common in the states, but in the states only If you watch for sales.

The only potential downside to this is that some NVMe drives I’ve seen can run hot especially during continuous writing or reading , so this can potentially pose a problem for the camera and could possibly trigger a thermal shutdown of the camera although probably not that likely. In theory this is a good idea, and it may work for some NVMe drives, but for others, it may not work as well due to heat issues, even if you use the thermal paste which more or less will just help transfer the heat to the casing.

But for me, I’d rather pay more for a pre-made card from Sandisk for example , and have a warranty where I can just send it back without having two pieces from two different mfrs to deal with. Some controllers do get hot, and would be fine in a computer because there’s more airflow, but in a camera, not so much. In theory, this device seems appealing, but the potentials for problems especially with some “performance” NVMe drives, which tend to run faster obviously, but at potentially higher temperatures again, fine for computer use or even laptop use where there is a fan or other cooling solution to help move the heat around, but not so much in a camera, which is the bigger concern here.

In stead of saying “what if it doesn’t work” why don’t you try “what if it works? So many half empty glasses here. It’s usually the controller that gets the hottest rather than the NAND so it’s also very localized.

Most of them are also not sandwiched too badly against other components tho, I can see thermals being compounded inside a camera where the card slot is completely sealed in and it’s often located near the battery which will be another source of heat. Could be a non-issue for more laid back stills shooting and a whole other story for bursts or video.

You don’t really need something like this for laid back shooting tho, so those most interested in it are also those most likely to run into issues.

They do, but they also have a fan in most cases, or are some how attached to the outer casing through thermal pads to help dissipate heat. My other concern with such a card case is if it got distorted from heat. Not looking forward to the day when on top of all the other idiosyncrasies we actually have to worry about CF-E thermals, heh, guess there’s something to be said for those QVLs. I am usually a “whatever works” kind of person, but there’s no way I’m trying a homemade memory card in my Z9 – given the amount of heat that is produced by cameras filming 8K.

I think I’m even going to stick with the obscenely expensive Nikon batteries for this camera again, because of the internal temp.

I think I was shooting 15 fps. The Anker is on the Nikon approved list. Costs half a 18 D including the USB charger. Has more than twice the power. It shows how a rip-off these CFexpress cards actually are. This could be a good alternative. Will wait for the first feedbacks but am tempted to try rather sooner than later.

May be so – but would you risk your camera warranty or insurance for a few dollars using home made card, not mentioning the possibility of losing all your photos if something go wrong – at least commercially available cards carry a warranty and possibly approval from your camera maker. Mais51 – I think it is near impossible to see how such a failure would be caused.

Nonetheless this is interesting and if it works I am not afraid to experiment. Nobody is forcing you to do so too.

Some CFex cards run very hot – up to 90oC – not too sure whether the custom case could handle such elevate temperature or melt down in the memory slot. Perhaps, but the “rip off” high priced cards generally have better QA in the materials. So, you can select your NVMe here, but who makes the circuit board and controller that you plug it into? The controller will make a huge difference here as the NVMe will only run as fast as the controller lets it. But at least with the pre-made cards from Sandisk and others you know the rated speed.

Here it’s anyone’s guess because just because the NVME claims to run at one speed, doesn’t necessarily mean you will get that speed the controller can bottleneck it. They would have to find a way to prove that you used an “unsupported” card which may have lead to overheating, which is a long stretch on the camera mfr’s part. DIY version will not “melt” in memory card slot it is made of metal! I’ve used them in Nikons and Canons, and they work very well.

Were they legit Ritz branded cards? I see a lot of discussions about people getting fake cards even fake Sandisk cards on Amazon Sony has just released a trio of impressively small, light, ultrawide lenses for APS-C. These lenses are designed for vloggers, so Chris decided to film himself and find out how they perform.

Holy moly, this thing is tiny! We take the adorable Sigma mm F2. Here’s what’s new and what we think so far We’ve been able to spend some quality time with Fujifilm’s APS-C flagship, and we have plenty of opinions!

How do you make weird lens even weirder? Put a periscope on it! We check out the new Laowa Periprobe 24mm F14 2X and explore some of the creative things you can do with such a bizarre lens. What’s the best camera for shooting landscapes?

High resolution, weather-sealed bodies and wide dynamic range are all important. In this buying guide we’ve rounded-up several great cameras for shooting landscapes, and recommended the best.

If you’re looking for the perfect drone for yourself, or to gift someone special, we’ve gone through all of the options and selected our favorites. These capable cameras should be solid and well-built, have both speed and focus for capturing fast action and offer professional-level image quality.

Although a lot of people only upload images to Instagram from their smartphones, the app is much more than just a mobile photography platform. In this guide we’ve chosen a selection of cameras that make it easy to shoot compelling lifestyle images, ideal for sharing on social media. The lens is fully manual and offers a 16mm full-frame equivalent focal length. It features a physical aperture dial, a minimum focusing distance of 25cm 9. This makes DJI the fifth entity to join the L-mount alliance, joining Leica, Leitz Cine, Panasonic and Sigma as partners in the mission to create ‘one unified lens mount standard.

Do you want to shape and create content for the largest audience of photography and video enthusiasts in the world? Go behind the scenes to see what it takes to shoot some of the most valuable race cars in the world.

Although Adobe says it will eventually make the web-based version of Photoshop free for all to use, the beta testing is currently limited to Canada we’re quite sure Chris and Jordan had nothing to do with this, but you never know.

Adobe has released a major update to its Lightroom ecosystem that includes video editing capabilities, new preset functionality and much more. Capture One 22 But what’s do these modes achieve? We to look at how data is captured, how it’s stored and what benefits you should expect from bit capture.

In addition to the new stills and video capture modes for the a1, Sony has also released a minor firmware update for its a7S III full-frame mirrorless camera. Have you ever come across a ‘Pro Mist’ or ‘Cinebloom’ filter and wondered what they do, or why you might want them? This little guide will help you get started on your mist filter journey.

For the first time, and aided by the Hubble Space Telescope, researchers have measured the mass of an isolated black hole through the Milky Way Galaxy. While none of these are deal-breaking issues, here are some the annoying camera quirks that really get under Chris and Jordan’s skin. This could be one of Leica’s most expensive limited-edition kits if they do end up retailing for the prices they’re expected to fetch. Who wouldn’t want a camera that looks like R2-D2 from Star Wars?

James DeFehr developed Pyro , a film developer that promises extremely fine grain, high contrast, expanded tonal control and long shelf life. It looks like a promising developer for black and white film enthusiasts.

Leica loves a good special edition camera and lens. The annual Comedy Pet Awards photo competition has released a collection of the best images submitted so far, showing off the funny side of all kinds of animals.

We go hands-on with the new XF mm F5. To make streaming and controlling your video streams easier and more accessible, Atomos has released the Zato Connect streaming monitor. You can control video feeds, add effects, and even record backup footage for ‘as-live’ streaming with the device.

Technology component experts Techinsights has posted a detailed analysis to its website confirming Nikon is using a Sony Semiconductor image sensor inside its flagship Z9 mirrorless camera.

Firmware v2. Dubblefilm has announced a new ISO color film. The Cinema film promises distinct colors and tones and a halo effect around bright red lights. Panasonic says the L2 tech tie-up with Leica will not affect the L-mount alliance the two companies share with Sigma.

Take a closer look at what the 11mm F1. Submit a News Tip! Reading mode: Light Dark. Login Register. Best cameras and lenses. Click to enlarge. Via: PetaPixel. Tags: cfexpress-type-b , memory-cards , storage. View Comments Comments All RobC88 Hi all. TimP I would guess the card isnt recognized because it has no partitions. Tested sustained read of 1. TimP A lot of fluff in these comments, normal cfexpress cards generate a huge amount of heat anyway, an SSD in a case is not going to be any worse.

Alberto Kioxia gb works pefectly on R5, R3 and D Richard Poinvil I also shot frames as fast as I could on both cards. And sorry that this isn’t very scientific.

Richard Poinvil Got mine all set up. Mike Don’t forget that thermal paste – eeeeeeeeesential! Scottelly An interesting follow-up article would be to take apart a few CF-Express cards to see what’s inside them.

TimP funnily enough most of the time is toshiba chips ;. Scottelly Yeah, it’s amazing, isn’t it? Scottelly And if they don’t fit right? RMK Colorado The space inside very tight and thermal pads wouldn’t fit. Just use CPU thermal paste. TimP really not enough space, didnt have any 0. Salgado Photo How do you know? Frankinidaho Geez, what could go wrong? Frankinidaho arniebook And it was even Y2K compliant.

Francis Sawyer People always predict “prices will fall” on every new rip-off flash-storage standard, but they’re wrong. Scottelly Me too.

 
 

Leave a Reply

Your email address will not be published. Required fields are marked *